Specification Previous Page |
||||||||
---|---|---|---|---|---|---|---|---|
Features | ||||||||
Host Adapter Architecture | RAID Management Utilities | |||||||
![]() |
PCI Express 2.0x8 | ![]() |
Mega CLI (Command Line Interface) | |||||
![]() |
6 Gb/s 8 SAS/SATA HDD via 2*SFF-8087 Mini-SAS | ![]() |
Mega RAID Storage Manager | |||||
![]() |
RAID 0,1,5,6,10,50,60 | ![]() |
Web BIOS | |||||
512MB 800MHz DDR II SDRAM | Operating System Support | |||||||
![]() |
Low Profile | ![]() |
Windows Server 2008, Windows 7,8,10 (32/64 bit) | |||||
Maintenance and Management Settings | ![]() |
Linux 1.0 | ||||||
![]() |
RAID Array Roaming | RAID Monitoring Tools | ||||||
![]() |
Unplug/Remove RAID array | ![]() |
SMTP for email notification | |||||
![]() |
Hot key (ctrl-h) boot-up RAID manager via BIOS | ![]() |
SES-2 enclosure management (Failed, SMART (SHI)) | |||||
![]() |
Firmware update while running the Operating System | ![]() |
Enclosure mnaagement support I2C | |||||
![]() |
Online Capacity Expansion (OCE) | ![]() |
Event Log | |||||
![]() |
Online RAID Level Migration | Package Contents | ||||||
![]() |
Fast Initialization for quick array setup | ![]() |
Controller Card | |||||
![]() |
Automatic drive (insert / removal) detection | ![]() |
Low Profile Bracket, High Profile Bracket | |||||
![]() |
I/O Load Balancing | |||||||
![]() |
Staggered Drive Spinup | |||||||
![]() |
Rebuild Priority (Low - Highest) | |||||||
![]() |
Spin Down Idle Mode | |||||||
![]() |
Hot Swap and Hot plug | |||||||
![]() |
S.M.A.R.T Support | |||||||
![]() |
Multiple RAID array | |||||||
![]() |
Multiple Logical Drive | |||||||
![]() |
64bit LBA support greater than 2TB per volume | |||||||
Download PDF File |